95kPa specimen bags | UN3373 Category B Packaging 95 kPa Bags
1. General Description
Either the primary or secondary receptacle must be capable of
passing the 95kPa internal
AI650 Biological Substance Category B Packaging Selection
AI650 offers a range of certified packages for shipping Category B
specimens based on the
temperature sensitivity of the specimen payload.
• CAT B Ambient Specimen Shipping Systems
• CAT B Refrigerated Specimen Shipping Systems
• CAT B Frozen Specimen Shipping Systems
• CAT B Combination Specimen Shipping Systems
Category B Ambient IATA Packaging
2. Available sizes
|Size (I.D.: mm)||Size (I.D.: inch)||Qty per carton|
|Small||150mm x 240mm||6" x 9.5"||400 bags|
|Medium||250mm x 300mm||9.75" x 11.75"||200 bags|
|Large||300mm x 400mm||11.75" x 15.75"||200 bags|
|X-Large||350mm x 450mm||13.75" x 17.75"||100 bags|
3. Take the guesswork out of packaging, protecting and shipping four
inner containers of your hazmat
materials in one box with AI 650’s 4GV Packaging Kits. These
UN-certified, Variation Two shippers are
suitable for shipping hazardous liquids or solids in Packing Groups
I, II and III by any mode of transportation.
They can accommodate your own glass or plastic bottles which must
pass hydrostatic pressure tests to
meet ISTA Procedure 1A when shipping by air. These kits include
everything you need to protect your
containers’ internal contents, such as absorbent pouches,
fiberboard insert, fiberboard pads, ties,
pressure-sensitive tape and a 4GV corrugated outer box. Available
in two sizes, you can ship either
four 8-oz. or four 1L containers. Save yourself time and avoid
packaging errors and compliance issues
when shipping four inner containers of hazardous materials by using
one of these all-inclusive 4GV packaging kits.
4.These pressure bags are made with a custom film structure that
features a strong adhesive closure and
continuous seal, which makes it ideal for critical liquid and
substance containment. The permanent adhesive
closure withstands a temperature range of -40⁰C up to +55⁰C (-40⁰F
up to +130⁰F).
5.It is suitable for transport packaging of pipes, bottles,
containers or some samples with potential infectious
sources to the laboratory. This series of products received 95KPa
pressure and leakage test in the
temperature range of -40 ° C to +50 ° C;
6.Specimen transport bags are liquid tight and tamper evident. The
patented adhesive closure and
continuous seal meet or exceed standards of all major air carriers
and DOT. Polyethylene construction
and adhesive closure provides added security during handling by
7.How to Close The Shipping Bag Properly
Specimen shipping bags in this carton are designed to perform at
high internal pressure, should an airliner
lose its cabin pressure. So, in order for the bag to be effective
and perform to its design capabilities, the bag
must be closed properly after insertion of the specimen
Q1. What is your terms of packing?
A: Generally, we pack our goods in cartons. If you have legally
registered patent, we can pack the goods in your
branded boxes after getting your authorization letters.
Q2. Can i ask one pair samples before place order?
A:Yes we can produce by your samples,we can send you samples for
free,but customer need to pay
courier cost by themselves.
Q3.How do you take care when your clients received defective
A: replacement. If there are some defective items, we usually credit
to our customer or replace in next shipment.
Q4.How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check
the goods when they go into next
step production procedure.
Q5. How can I place order?
A: You can contact us by email about your order details, or place
order on line.
Q6.How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and
Paypal, Western Union are the most usual
ways we are using.
Q7.What’s the order procedure?
A: First we discuss order details, production details by email or TM.
Then we issue you an PI for your
confirmation. You will be requested to do pr -epaid full payment or
deposit before we go into production.
After we get the deposit, we start to process the order. We usually
need 7-15days if we don’t have the
items in stock. Before production has been finished, we will
contact you for shipment details, and the
balance payment. After payment has been settled, we start to
prepare the shipment for you.
Q8. How about your delivery time?
A: Generally, it will take 5 weeks after receiving your advance
payment. The specific delivery time depends
on the items and the quantity of your order.
Q9. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers
2. We respect every customer as our friend and we sincerely do
business and make friends with them,
no matter where they come from.